MM25 epoxy binder is designed to stabilize master models made from MDF. MM25 has a low viscosity and a long processing window, allowing it to penetrate MDF to a depth of over 25 mm.
MM25 epoxy adhesive is designed to stabilize master models made from MDF. MM25 has a low viscosity and a long processing window, allowing it to penetrate MDF to a depth of over 25 mm. Impregnation of MDF can be accomplished using vacuum infusion or contact impregnation. Curing occurs at 40-50°C or by prolonged exposure at room temperature.
Key Features
Low viscosity
The technological window is more than 4 hours
Improves the machining of master models
Reduces moisture absorption of master models
Improving the quality of the working surface of the master model
Operating temperature of the master model up to 40 ℃
Scope of application
Impregnation of MDF for the production of master models in order to improve operational characteristics: simplification of mechanical processing, improvement of the quality of the working surface compared to MDF, increase in the service life of master models.
Свойства МДФ, пропитанного связующим ММ25
Плотность до/после пропитки, г/см3
ГОСТ 15139
0,73/1,3
Твердость по Шору типа D
ГОСТ 24621
81
КЛТР в направлении X, 10-6
1/K
ГОСТ 32618.2
26
КЛТР в направлении Z, 10-6 1/K
ГОСТ 32618.2
160
All specifications are in the technical description
