Каталог материалов Клеи Буклет по тканям Материалы для ремонта ПКМ Каталог материалов для БАС, БЭК и ТСР

Nothing found for your search

UAV

Materials for unmanned systems are characterized by high specific strength and resistance to vibration and climatic loads. They ensure geometric accuracy and stability of properties under variable operating conditions. Quality control is aimed at ensuring reliability and repeatability of characteristics.

Carbon fabrics and tapes

Tooling materials

Sealers and fillers

Repair materials

Pastes and compounds

Interior materials

Resins

Epoxy resin E30-60

Impregnation temperature, °C:
25
Viscosity:
272 mPa s
T hole, °C:
25
Operating temperature, °C:
до 80

Minimum order quantity - 10 kg.

Epoxy resin T20-60

Impregnation temperature, °C:
25
Viscosity:
no more than 400 mPa s at 25°C
T hole, °C:
25-80
Operating temperature, °C:
80

Minimum order quantity - 10 kg.

Epoxy resin T30-60

Impregnation temperature, °C:
25
Viscosity:
no more than 400 mPa s at 25°C
T hole, °C:
25
Operating temperature, °C:
до 80

Minimum order quantity - 10 kg.

Epoxy resin TK123

Impregnation temperature, °C:
25-40
Viscosity:
no more than 500 mPa s at 25°C
T hole, °C:
25-120
Operating temperature, °C:
100

Minimum order quantity - 10 kg.

Epoxy resin T31

Impregnation temperature, °C:
70
Viscosity:
no more than 100 mPa s at 70°C
T hole, °C:
180
Operating temperature, °C:
140

Minimum order quantity - 10 kg.

Epoxy resin T40-140

Impregnation temperature, °C:
40-70
Viscosity:
no more than 400 mPa s at 40°C
T hole, °C:
140
Operating temperature, °C:
150

Minimum order quantity - 10 kg

Structural resin T26

Impregnation temperature, °C:
180
Viscosity:
no more than 78 mPa s at 110°C
T hole, °C:
180
Operating temperature, °C:
150

Minimum order quantity - 10 kg.

Epoxy adhesive MM25

Impregnation temperature, °C:
40
Viscosity:
не более 150 мПа·с при 25°С
T hole, °C:
50
Operating temperature, °C:
50

Carbon fabrics and tapes

УЦЕНКА: Углеродная лента с биндером 10524, 400 мм (рулон 39,4 м2)

Carbon tape: 10270, 1000 mm

Minimum order quantity - 50 m²

Glass thermo-adhesive fabric TST/T-64(VMP)-78

Minimum order quantity - 50 m²

Carbon fiber: 22502 SYT45-3K

Minimum order quantity - 50 м²

Carbon tape: 10270, 400 mm

Minimum order quantity - 50 m²

Carbon fabric: 22402

Minimum order quantity - 50 м²

Carbon tape: 10524, 400 mm

Minimum order quantity - 50 m²

Glass thermo-adhesive fabric TST/E3/1-100-76(100)

Minimum order quantity - 50 m²

Carbon tape: ITM 200

Minimum order quantity - 1 roll

Carbon fabric: 22503

Minimum order quantity - 50 м²

Glass thermo-adhesive fabric TST/T-10-14(92)

Minimum order quantity - 50 m²

Glass thermo-adhesive fabric TST/T-25(VMP)-78

Minimum order quantity - 50 m²

Carbon fiber fabric with binder and film

Tooling materials

Epoxy adhesive MM25

Sealing compound Aquamarine 45

Minimum order quantity - 10 kg.

Repair paste PR30M

Minimum order quantity - 1 kg.

Prepregs

Препрег эпоксидный АРЕС130Т/200

T hole, °C:
80-150℃
Operating temperature, °C:
85
Type of binder:
Эпоксидный
Reinforcing filler:
углеродная однонаправленная лента 200 г/м2
Width, mm:
1000

Minimum order quantity - 50 м²

Препрег эпоксидный АРЕС130С

T hole, °C:
80-150℃
Operating temperature, °C:
85
Type of binder:
Эпоксидный
Reinforcing filler:
стеклоткань Т-10П-14
Width, mm:
920

Minimum order quantity - 50 м²

Epoxy prepreg ARES130T

T hole, °C:
80-150℃
Operating temperature, °C:
85
Type of binder:
Epoxy
Reinforcing filler:
carbon twill fabric 2/2, 200 g/m2
Width, mm:
1000

Minimum order quantity - 50 m²

Epoxy prepreg ARES130T

T hole, °C:
80-150℃
Operating temperature, °C:
85
Type of binder:
Epoxy
Reinforcing filler:
carbon twill fabric 2/2, 400 g/m2
Width, mm:
1000

Minimum order quantity - 50 m²

Epoxy prepreg ARES130TM

T hole, °C:
80-150℃
Operating temperature, °C:
85
Type of binder:
Epoxy
Reinforcing filler:
carbon twill fabric 2/2, 200 g/m2
Width, mm:
1000

Epoxy prepreg VNT120T

T hole, °C:
130℃ (120 мин)/150℃ (15 мин)
Operating temperature, °C:
100
Type of binder:
Эпоксидный
Reinforcing filler:
углеродная ткань саржа 2/2 200 г/м2
Width, mm:
1000

Minimum order quantity - 50 м²

Epoxy prepreg VNT120T

T hole, °C:
130℃ (120 min)/150℃ (15 min)
Operating temperature, °C:
100
Type of binder:
Epoxy
Reinforcing filler:
200g/m2 carbon unidirectional tape
Width, mm:
1000

Minimum order quantity - 50 m²

Epoxy prepreg VNT120T

T hole, °C:
130℃ (120 min)/150℃ (15 min)
Operating temperature, °C:
100
Type of binder:
Epoxy
Reinforcing filler:
120g/m2 carbon unidirectional tape
Width, mm:
1000

Minimum order quantity - 50 m²

Epoxy prepreg VNT120T-A

T hole, °C:
130℃ (120 min)/150℃ (15 min)
Operating temperature, °C:
100
Type of binder:
Epoxy
Reinforcing filler:
carbon fiber fabric 80 g/m2
Width, mm:
1000

Minimum order quantity - 50 m²

Препрег эпоксидный ВНТ120А

T hole, °C:
130℃ (120 мин)/150℃ (10 мин)
Operating temperature, °C:
100
Type of binder:
Эпоксидный
Reinforcing filler:
арамидная ткань 400 г/м2
Width, mm:
1000

Minimum order quantity - 50 м²

Epoxy prepreg C107

T hole, °C:
180
Operating temperature, °C:
120
Type of binder:
Epoxy
Reinforcing filler:
fiberglass T-64-(VMP)-78
Width, mm:
920

Minimum order quantity - 50 m²

Epoxy prepreg VNT120S

T hole, °C:
130℃ (120 min)/150℃ (15 min)
Operating temperature, °C:
100
Type of binder:
Epoxy
Reinforcing filler:
fiberglass T-25(VMP)-78
Width, mm:
920

Minimum order quantity - 50 m²

Epoxy prepreg VNT120S

T hole, °C:
130℃ (120 min)/150℃ (15 min)
Operating temperature, °C:
100
Type of binder:
Epoxy
Reinforcing filler:
fiberglass T-64(VMP)-78
Width, mm:
920

Minimum order quantity - 50 m²

Epoxy prepreg VNT120S

T hole, °C:
130℃ (120 min)/150℃ (15 min)
Operating temperature, °C:
100
Type of binder:
Epoxy
Reinforcing filler:
fiberglass E-3/1-100
Width, mm:
1000

Minimum order quantity - 50 m²

Epoxy prepreg VNT120S

T hole, °C:
130℃ (120 мин)/150℃ (15 мин)
Operating temperature, °C:
100
Type of binder:
Эпоксидный
Reinforcing filler:
стеклоткань Т-10-14(92)
Width, mm:
920

Minimum order quantity - 50 м²

Epoxy prepreg C107

T hole, °C:
180
Operating temperature, °C:
120
Type of binder:
Epoxy
Reinforcing filler:
fiberglass T-10-14(92)
Width, mm:
920

Minimum order quantity - 50 m²

Epoxy prepreg B180

T hole, °C:
180
Operating temperature, °C:
150
Type of binder:
Epoxy
Reinforcing filler:
carbon twill fabric 2/2 200 g/m2
Width, mm:
1000

Minimum order quantity - 50 m²

Prepreg epoxy T107

T hole, °C:
180
Operating temperature, °C:
120
Type of binder:
Epoxy
Reinforcing filler:
carbon fabric twill 2/2 200 g/m2, ITA40-3K
Width, mm:
1000

Minimum order quantity - 50 m²

Adhesives

Epoxy adhesive AT-44K

T hole, °C:
25℃ (24 hours)/65℃ (2 hours)
Operating temperature, °C:
180/250 кратк.
Viscosity:
22
Shear strength, MPa:
30

Minimum order quantity - 5 kg

Epoxy glue AT-44RM

T hole, °C:
25℃ (4 ч)/65℃ (1 ч)
Operating temperature, °C:
85
Viscosity:
280-320
Shear strength, MPa:
25

Minimum order quantity - 5 кг.

Epoxy adhesive A-77N

T hole, °C:
25℃ (24 h)/65℃ (2 h)
Operating temperature, °C:
180/250 кратк.
Viscosity:
1.5
Shear strength, MPa:
39

Minimum order quantity - 6 kg.

Epoxy glue AT-44M

T hole, °C:
25℃ (24h)/65℃ (2h)
Operating temperature, °C:
85
Viscosity:
22
Shear strength, MPa:
37

Minimum order quantity - 5 kg.

Epoxy aerosol adhesive KS22

T hole, °C:
25
Operating temperature, °C:
180
Viscosity:
-
Shear strength, MPa:
-

Minimum order quantity - 12 pcs.

Sealers and fillers

Sealing compound Aquamarine 45

Number of components:
2
T hole, °C:
65
Operating temperature, °C:
25-190
Viscosity:
29400 mPa*s

Minimum order quantity - 10 kg.

Film adhesives

KV120 epoxy foaming film adhesive

T hole, °C:
120℃ (180 min)/180℃ (120 min)
Operating temperature, °C:
150
Surface density, g/m2:
1000
Shear strength, MPa:
-

Minimum order quantity - 1 m²

Film epoxy adhesive SPK120/100

T hole, °C:
130℃ (120 min)
Operating temperature, °C:
120
Surface density, g/m2:
100-300
Shear strength, MPa:
47

Minimum order quantity - 50 m²

Repair materials

Sealing compound Aquamarine 45

Minimum order quantity - 10 kg.

Repair paste PR30M

Minimum order quantity - 1 kg.

Made in Russia

Our goal is to provide our customers with world-class materials and technical support.

phone

+7 (495) 133-26-78

for product purchasing inquiries

sales@itecma.ru

vacancies

hr@itecma.ru

For inquiries regarding the manufacturing of PCM products and tooling, please send an email

production and warehouse

Podolsk, Zavodskaya St., Building 2

head office

Moscow, Ramensky Boulevard, Building 1

Website creation – NetLab

2025-2026 ITEKMA © all rights reserved
ITEKMA websites use cookies and other similar technologies. If you continue to browse our website after reading this message, it means you agree to our use of these technologies.